Changing the functions of this thing is something which you need to do with extreme caution. If not, you can damage the radio as well and you cannot get a replacement for that. This is why it is important that for you to familiarize with the process and stick with it even if you have always wanted to explore.
You should not paint this item just for fun. A military CB antenna is meant to look professional since your superiors are bound to check it. Thus, stick with what your colleagues have done and you can even ask for their help if you are really having difficulty dealing with yours.
Do not exert too much effort on the base. It has to maintain the right level of tightness before you opened it up. Yes, you can be a little bit of short with that level but your main concern is not to let the base collapse. So, make measured twists and stop when one is already having doubts with what you are doing.
Only let a screwdriver remove the lid from the bottom. With the lid out of the way, you can already search for the cable. Thus, simply take your time and be certain that the cables have not been exposed beforehand since that can cause a friction between you and these objects which can be very dangerous.
Turn the fifth capacitor slowly with the use of your tools. Make sure that it is the correct nub buy moving clockwise from the cable. Also, know the power capacity of the antenna for you to match things up. Excessively turning the capacitor would only dull other frequencies and even lead your radio to blow up.
Have more than enough length for the cable which you shall be using. If your CB is a little bit far, you can make use of the allowance to finally make the connection. Also, be able to protect yourself by using the right gear. Do not touch any of the heated parts without the official materials for your safety.
Do not leave your station if there is still a gap between the cable and its respective destination. Mounting this thing is important too. Do not mix metal materials in one platform since that can really disrupt the reception that you shall be receiving. This can result to an accident that your headquarters will know nothing about. You might not get back in one piece.
Let a SWR meter be the judge of the progress which you have made. If you did not meet the work, you possess no choice but to retrace your steps. However, be aware of your exact mistake for you to get it right for the second time.
The lid at the bottom must be tightly closed after the modification. Air can be very harmful for wires. Thus, check the screws once again and do not hesitate to tape it up if you are confident that you already got everything right for the nth time.
You should not paint this item just for fun. A military CB antenna is meant to look professional since your superiors are bound to check it. Thus, stick with what your colleagues have done and you can even ask for their help if you are really having difficulty dealing with yours.
Do not exert too much effort on the base. It has to maintain the right level of tightness before you opened it up. Yes, you can be a little bit of short with that level but your main concern is not to let the base collapse. So, make measured twists and stop when one is already having doubts with what you are doing.
Only let a screwdriver remove the lid from the bottom. With the lid out of the way, you can already search for the cable. Thus, simply take your time and be certain that the cables have not been exposed beforehand since that can cause a friction between you and these objects which can be very dangerous.
Turn the fifth capacitor slowly with the use of your tools. Make sure that it is the correct nub buy moving clockwise from the cable. Also, know the power capacity of the antenna for you to match things up. Excessively turning the capacitor would only dull other frequencies and even lead your radio to blow up.
Have more than enough length for the cable which you shall be using. If your CB is a little bit far, you can make use of the allowance to finally make the connection. Also, be able to protect yourself by using the right gear. Do not touch any of the heated parts without the official materials for your safety.
Do not leave your station if there is still a gap between the cable and its respective destination. Mounting this thing is important too. Do not mix metal materials in one platform since that can really disrupt the reception that you shall be receiving. This can result to an accident that your headquarters will know nothing about. You might not get back in one piece.
Let a SWR meter be the judge of the progress which you have made. If you did not meet the work, you possess no choice but to retrace your steps. However, be aware of your exact mistake for you to get it right for the second time.
The lid at the bottom must be tightly closed after the modification. Air can be very harmful for wires. Thus, check the screws once again and do not hesitate to tape it up if you are confident that you already got everything right for the nth time.
About the Author:
You can visit www.hascall-denke.com for more helpful information about Modifying A Military CB Antenna.
No comments:
Post a Comment